Soak it up
Use warm water to fully wet your vehicle with a hose or pressure washer. If using a pressure washer, always use the fan setting and keep the lance at least one metre away from the vehicle body.
Apply mild soap
Once soaked, apply a mild soap or snow foam using your hose or pressure washer, keeping the lance the same safe one metre distance. Strong detergents or chemicals can damage the graphics, so stick to gentle products.
Clean gently
Use a soft body brush to remove dirt, working carefully around graphics. Avoid heavy scrubbing – too much pressure can lift the edges of your wrap or graphics.
Rinse thoroughly
Rinse all soap away with warm, clean water, maintaining the one metre distance. Make sure no soap residue remains for the best results.
Key tips
- No steam cleaners. High heat can damage the graphics.
- Stick to mild soap or snow foam. Avoid strong chemicals or traffic film removal cleaners.
This guide is advisory only. It’s designed to help protect your graphics, but it is not a guarantee.
